|
|
Click pictures to enlarge: |
|
|
|
Click pictures to enlarge: |
The
Acceleration Test mode records acceleration, motor current, and
wind speed or voltage at a high frequency. It is used as a diagnostic
test for certain problems.
|
|
|
|
Speed Mode reports the maximum
speed achieved during a trip. The speed can be measured from
anywhere - the elevator car, the ground, or even your office -
without using a tachometer! |
|
 |
The
Inspection Mode shows what the elevator is doing at any instant.
It is also useful for long-term monitoring of the
elevator, since it records acceleration events, trip data, energy,
speed, and total
usage.
|
|
|
|
In addition,
Inspection Mode allows the technician or elevator owner
to record observations in a checklist. |
|
 |
Inspection Mode also records gate
activity, and periodic readings from a variety of sensors. A variety
of sensors can be used to measure all aspects of the elevator
operation.
|
|
 |
|
Whenever a sensor reading exceeds a
user-specified limit in
Inspection Mode, it is recorded in the stored data and shown on
the screen.. |
|
 |
|
Inspection Mode monitors the
status of the variable frequency drive. The user can instantly see
any alarms and faults that occur. |
|
 |
|
Parameter settings for all modes can be
easily changed to provide flexibility. |
|
 |
